Hydraulic Iron Worker/Punch Cutting Machine/Iron Rod Cutting Machine Q35Y-50
1. Shearing Station:
a. Round & square bar shearing: there are multiple holes for a varity of sizes. Adjustable hold down device is convenient for shearing various sizes of round and square bar, channel, joist, etc
b. Flat bar shearing: large 15" squraing arm with inlaid scale as standard equipment. Special anti-disorted blade for quality cutting. Lower blade has four usage edges. There is screw allow for gap adjust no shim needed..
c. Angle iron shearing: the angle iron shear has the ability to cut angle iron at 45 degrees & 90 degrees withe diamond shaped blade. e.g.This gives the operator the ability to make a picture frame corner for perfect welds.
d. Diamond shaped blade for quality cuts that is minimal material wast. Easily adjustable hold-down device for accurate plate cutting.
2. Punching Station:
a. Largw viewing window on stripper.
b. Swing-away dwsign for easy operation.
c. Available unique style allows for large angle iron punching and large channel punc. Fully protected electrical hardness for safety and reliability.ching.
d. Quick change coupling nut and sleeve for rapid replacement change
e. Large two pieces gauging table with rules and stop as standard equipment.
3. Notching Station:
a. Unique design for unsurpassed cutting of angle and flat bar.
b. Electrical interlock safety guard and three gauging stops for precise positioning.
c. with ventilated device for good visibility.
d. The notching station also has an oversized table with material stops.
4. Electronic backgauge device:
a. With 3 supporting feet.
b. Finb. Fine adjustment assures precision cuts.e adjustment assures precision cuts.
c. Fully protected electrical hardness for safety and reliability.
d. Large contact button for high efficiency productivity.
Specification
| Model | Q35Y-12 | Q35Y-15 | Q35Y-16 |
| Pressure(Ton) | 45 | 55 | 60 |
| Max.cutting thickness(mm) | 12 | 15 | 16 |
| Plate strength(N/mm2) | ≤450 | ≤450 | ≤450 |
| Cutting angle(degree) | 7° | 7° | 7° |
| Shearing size of one stroke(mm) | 12x250 | 15x300 | 16x250 8×400 |
| Ram stroke(mm) | 60 | 60 | 80 |
| Cycles/min(20mm stroke)(mm) | 8 | 8 | 8 |
| Throat depth(mm) | 200 | 200 | 300 |
| Punching thickness(mm) | 12 | 15 | 16 |
| Max.Punching diameter(mm) | 22 | 24 | 25 |
| Power of main motor(kw) | 3 | 4 | 4 |
| Overall dimensions(L*W*H)mm | 1200x520x1500mm | 1320x590x1620mm | 1640x730x1770mm |
| Weight of machine(kg) | 1000 | 1400 | 1600 |
| Model | Q35Y-20 | Q35Y-25 | Q35Y-30 | Q35Y-40 |
| Pressure(Ton) | 90 | 110 | 140 | 200 |
| Max.cutting thickness(mm) | 20 | 25 | 30 | 40 |
| Plate strength(N/mm2) | ≤450 | ≤450 | ≤450 | ≤450 |
| Cutting angle(degree) | 8° | 8° | 8° | 8° |
| Shearing size of one stroke(mm) | 20x330 10×480 | 25x330 16×600 | 30x355 20×600 | 35x400 25×700 |
| Ram stroke(mm) | 80 | 80 | 80 | 100 |
| Cycles/min(20mm stroke)(mm) | 8 | 6 | 6 | 8-25 |
| Throat depth(mm) | 355 | 400 | 600 | 600 |
| Punching thickness(mm) | 20 | 25 | 26 | 35 |
| Max.Punching diameter(mm) | 30 | 35 | 38 | 41 |
| Power of main motor(kw) | 5.5 | 7.5 | 11 | 15 |
| Overall dimensions(L*W*H)mm | 1860x800x1900mm | 2355x960x2090mm | 2680x1040x2300mm | 2850x1300x2400mm |
| Weight of machine(kg) | 2500 | 4500 | 6800 | 9500 |
