W24S-16 CNC Hydraulic Section bending machine/ Vertical Section Aluminum Profile Bending Machine
Specification:
Colour:blue
Automatic:Hydraulic
Hydraulic angle rolling machine & section bender
Bend type:stainless steel,angle steel,steel bar,flat steel,channel steel,steel tubes&pipes
Power system:hydraulic
Hydraulic angle rolling machine & section bending machine
1. Perfectly complete pre-bending,rolled-up,roll calibrate.
2. Working principle: two down rollers as main driving roller,or all three rollers as main driving roller,with upper roller fixed and two down rollers do up-and-town movement around one fixed center
3. Well hydraulic control,displacement liquid-crystal display with accuracy+_0.1mm
4. The two touch steel stick can permit the good finishing quality of asymmetric plate section bending
5. Advanced and compact structure with full function.
6. The machine has two oil tanks,and the head can turn over horizontally or vertically.
7. The yield strength bended profile with 320 Mpa (Max).
8. Full function,complicated structure,high precision and very stronger.
| Model Technical Parameters | W24S-16 |
| Max. Anti-Winding Cass-Section Moulds (cm3) | 16 |
| Winding Speed (m/min) | 3 |
| Yield Strength (MPa) | 245 |
| Angle Steel Internal Winding | Max. Cross – Section(mm) | 70×8 |
| Min. Winding Dia. (mm) | 1000 |
| Min. Cross - Section(mm) | 30×3 |
| Min. Winding Dia. (mm) | 550 |
| Angle Steel Eternal Winding | Max. Cross – Section(mm) | 75×10 |
| Min. Winding Dia. (mm) | 1000 |
| Min. Cross - Section(mm) | 30×3 |
| Min. Winding Dia. (mm) | 550 |
| Channel Steel Eternal Winding | Model | 12 |
| Min. Winding Dia. | 800 |
| Channel Steel Internal Winding | Model | 14 |
| Min. Winding Dia. | 900 |
| Flat Steel plane-bending | Max. Cross - Section | 150×25 |
| Min. Winding Dia. | 700 |
| Flat Steel vertical bending | Max. Cross - Section | 75×16 |
| Min. Winding Dia. | 760 |
| Motor Power | KW | 5.5 |
