Wobble Head Handheld High Quality Automatic Fiber Laser Welding Machine For Stainless Steel Iron Aluminum Copper
This machine is suitable for welding of gold, silver, titanium, nickel, tin, copper, aluminum and other metal and its alloy material, can achieve the same precision welding between metal and dissimilar metals, has been widely used in aerospace equipment, shipbuilding, instrumentation, mechanical and electrical products, automotive and other industries.
1. The energy density is high, the heat input is low, the amount of thermal deformation is small, and the melting zone and the heat-affected zone are narrow and deep.
2. High cooling rate, which can weld fine weld structure and good joint performance.
3. Compared with contact welding, laser welding eliminates the need for electrodes, reducing daily maintenance costs and greatly increasing work efficiency.
4. The weld seam is thin, the penetration depth is large, the taper is small, the precision is high, the appearance is smooth, flat and beautiful.
5 .No consumables, small size, flexible processing, low operating and maintenance costs.
6. The laser is transmitted through fiber optics and can be used in conjunction with a pipeline or robot.
Technical Data
| Model | 1000SM | 1500SM | 2000SM |
| Laser Running Mode | Continuous/Modulate |
| Input Voltage | AC220V±10%, 50HZ/60HZ(Single Voltage) | AC380V±10%, 50HZ/60HZ(Three Voltage) | AC380V±10%, 50HZ/60HZ(Three Voltage) |
| Beam Quality | M2<1.1 | M2<1.15 | M2<1.2 |
| Raycus Device Power | 1000W | 1500W | 2000W |
| Line Width | <4nm | <4-5nm | <5nm |
| Laser Wavelength | 1070nm |
| Beam-divergence Angle | ≤1.2mrad/m |
| Welding Connector | QBH |
| Fiber Length | 10-15m |
| Position | Red Pointer |
| Cooling System | Industrial water chiller,circulation system, heat exchange titanium tube, over temperature alarm, flow protection, water level protection |
Here are 1000w and 1500w laser welding machine maximum welded capacity
| 1000W | Stainless steel | 4mm |
| Carbon steel /mild steel | 5mm |
| Galvanized Sheet | 2mm |
| Brass | 1mm |
| Aluminum | 2mm |
| 1500W | Stainless steel | 6mm |
| Carbon steel /mild steel | 8mm |
| Galvanized Sheet | 4mm |
| Brass | 2mm |
| Aluminum | 3mm |
Comparison
| Difference | Traditional Welding | Yag Laser welding | Fiber Laser Welding |
| Heat effect to the workpiece | very high | low | low |
| Deformation of the workpiece | big | small | small |
| Bond strength to base metal | general | good | very good |
| After-treatment | Polishing | No need to polish, or rarely polished | No need to polish, or rarely polished |
| Welding speed | general | More than 2 times argon arc welding | More than 2 times argon arc welding |
| Applicable material | stainless steel, carbon steel. galvanized sheet | stainless steel, Carbon steel. galvanized sheet | stainless steel, carbon steel. galvanized sheet |
| Consumables | More consumables | Less consumables | Less consumables |
| Operation difficulty | complex | general | simple |
| Operator safety | Unsafe | Safety | Safety |
| Environmental protection impact | Not environmentally friendly | Environmental protection | Environmental protection |
| Welding fault tolerance | it is good | not good | it is good |
| Swing welding | no | no | yes |
| Spot width adjustable | no | no | yes |
| Welding quality comparison | difference | general | Very good |
