2 Rolls Plate Rolling Machine, Two Rollers Plate Bending Machine For Stainless Steel, 2 Rollers Bending Machine
SMART CNC hydraulic 2-roll plate bending machines are designed for rolling and bending thin plates with thickness less than 4mm, to meet the needs of pre-processing of sheet metal from tank manufacturers, cylinder manufacturers, tube manufacturers.
These plate bending rolls are widely used for processing water heater tank, air tank, fire extinguisher, air compressor tank, resonator pipe, air duct in various industries, including auto parts, solar water heaters, food machinery, metal processing equipment, etc.
The maximum thickness of materials processed by this hydraulic plate rolling machine reaches 6mm, and diameter less than 600mm. By adopting high grade polyurethane rollers, it can ensure stable operation and long service life.
Standard types
| Model | S500 | S700 | S1000 | S1500 |
| Rated power(KW) | 3 | 3 | 6 | 6 |
| Hydraulic pressure range(Mpa) | 3-8 | 3-8 | 4-12 | 4-12 |
| Thickness(mm) | 0.8-2.5 | 0.8-2.5 | 0.8-3.5 | 0.8-3.5 |
| Rolling Diameter(mm) | 90-300 | 100-300 | 150-450 | 200-450 |
| Rolling Width(mm) | 50-500 | 50-700 | 50-1000 | 50-1500 |
| Machine size(m) | 1.9×1×1.2 | 2.3×1×1.3 | 2.9×1×1.4 | 3.3×1×2.1 |
| Weight(kgs) | 1,100 | 1,500 | 1,800 | 2,400 |
Customized types
| Model | C500 | C700 | C1000 | C1500 |
| Rated power(KW) | 6 | 6 | 7.7 | 7.7 |
| Hydraulic pressure range(Mpa) | 4-12 | 4-12 | 5-16 | 5-16 |
| Thickness(mm) | 0.8-6 | 0.8-6 | 0.8-6 | 0.8-4 |
| Rolling Diameter(mm) | 100-450 | 100-450 | 200-600 | 200-600 |
| Rolling Width(mm) | 100-500 | 100-700 | 100-1000 | 100-1500 |
| Machine size(m) | 2.5×1×1.4 | 2.5×1×1.4 | 3.1×1.1×1.5 | 3.5×1.1×2.5 |
| Weight(kgs) | 1,800 | 1,800 | 2,300 | 2,700 |
Main Rolling Machine Equipment capacity
a) Single person operation;
b) Using two-hand button operation console layout;
c) Equipment length, width, height (unit: mm):Please see model
d) Processing material: stainless steel, carbon steel;
e) The processing range is in diameter: Please see model
f) Length range of processed pipe body: Please see model;
g) Range of wall thickness of processed pipe: 0.8mm-3.0mm;
h) Diameter tolerance requirements after processing: +/- 0.5mm;
i) The size difference of the opening after rounding: less than 10mm;
j) Lateral displacement after rounding: +/- 0.5mm;
k) No scratches on the surface of the pipe after rolling;
l) Equipment production cycle: 5-20 seconds / piece;
Machine rolling machine Configuration
| Name | Description |
| Bearing | Types | Spherical bearing / roller bearing |
| Manufacturer | Luoyang Bearing / Wafangdian Bearing |
| Rollers | Roller material | 45 #(Upper Roller)/ 45 # Outer Glue |
| HRC | HB220-260(up rollers) |
| Factory | SMART CNC |
| Reducer | Types | Sewing needle wheel swing |
| Button ,switch | China famous |
| Valve | Pump | Types | Gear pump |
| Manufacturer | China famous brand |
| Valve | Manufacturer | China famous brand |
| Cylinder | Cylinder and piston | Forgings, heat treated HRC48-50 |
| Manufacturer | China famous brand |
| Seal ring | Yx types |
| Manufacturer | China famous brand |
| Controller | PLC | Korea LG |
| Switch | China famous brand |
| Color | Customized |
Production efficiency:5-20s/ Pieces
